Temperature Face Recognition and Screening Device

$0.00

  HIKVISION Face Recognition and Temperature Screening Device Key Features: Supports Vanadium Oxide uncooled sensor to measure the target's temperature Temperature measuring range: 30 °C to 45 °C (86 °F...

Tags

 

Key Features:

  • Supports Vanadium Oxide uncooled sensor to measure the target's temperature
  • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C  Recognition distance: 0.3 to 1.8m
  • Fast temperature measurement mode: Detects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
  • Face mask-wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Forced mask-wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page
  • Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%
  • 6000 face capacity, 6000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check-in, check out, break-in, break out, overtime in, overtime out
  • Watchdog design and tamper function
  • Audio prompt for authentication result
  • NTP, manually time synchronization, and auto synchronization
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
  • Imports and export data to the device from the client software
  • * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  • * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.

 

Specifications:

Dimensions

(w) 116.5 x (h) 290 x (d) 35mm

Display

7-inch Touch Screen

Face  Capacity

6,000

Card Capacity

6,000

Transactions

100,000

Transactions

200,000

Temperature range 

30 °C to 45 °C (86 °F to 113 °F)

Sensor

Vanadium Oxide uncooled sensor

Resolution

120 × 160

Frame rate

25 fps

Measurement accuracy

0.1 °C

Measurement deviation

± 0.5 °C, without black body calibration

Measuring distance

0.3 to 1.8 m

Camera Pixel

2MP, Dual lens

Communications

Wired network Support, 10/100/1000 Mbps self-adaptive

Power supply

12 VDC/2 A

Working temperature

0 °C to 50 °C (32 °F to 122 °F) For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)

Working humidity

10 to 90% (No condensing)

Application environment

Indoor and windless environment use only